Product Detail
degassing
Product details

Vacuum degaser is also called vacuum degas tank

1, an overview of the

The function of vacuum deairing machine is to remove the air (oxygen) in the liquid, to control the oxidation of the Browning, pigment, vitamin, aroma and other substances, and to prevent the quality from decreasing. Remove suspended particulates in the liquid, restrain the particles to float and maintain a good appearance; To prevent the sterilization of canning and high temperature sterilization; Improve the appearance of the product and reduce the corrosion of the inner wall of the container. This equipment adopts all parts contacting with materials, are made of high quality stainless steel, made of silicon rubber sealing ring is made of high quality food, vacuum system design of advanced, reliable, is very important in the production of fruit juice and food processing equipment.

2. Technical features

1. It can greatly shorten the exhaust time after the initial injection of the heating or cooling system, which is beneficial to the initial commissioning of the system.

2. Remove the gas in the system to prevent the gas resistance and ensure the stable and reliable system during normal operation.

3. Eliminate cavitation of water pump and reduce system running noise.

4. Due to the removal of oxygen in the water, the system will be reduced to aerobic corrosion and the use time of the equipment will be prolonged.

5. Due to the removal of the gas in the water, the heat exchanger surface will not be accompanied by air bubbles, which will improve the heating efficiency.

6. The working time and cycle of the degas can be adjusted according to need.

7. Single applicable system capacity can reach 150 m3; Multiple parallel operation.

8. Convenient installation, automatic operation, safe and reliable, easy to maintain.

3. Use steps

Use, as long as open the matching of the vacuum pump according to the operating instructions of the pump (pump), smoke detector in the air, at the same time within the materials will be fed from the inlet self-priming device, when the material rose to a position, control valve automatic control of material, at this time can observe and control the feeding speed from sight hole, when the degree of vacuum in condenser meet the process requirements, can be exported from material extraction material, as long as you maintain the balance of the vacuum degree and front-rear, can continue to produce.

Power generation equipment structure of feed system in order to prevent corrosion, and thus eliminate water mixture of non-condensable gas, carbon dioxide, nitrogen, air, etc And can heat the water and the open model of the heat exchangers to maintain water pump suction head together.

Structure and principle

The device all contact with the juice part are made of high quality stainless steel and hard rubber, it is mainly composed of: barrel, roof, one-way valve, nozzle, valve, floodlight, depending on the hole, etc, when used as long as open the matching of the vacuum pump according to the operating instructions of the pump (pump), smoke detector in the air, at the same time within the materials will be fed from the inlet self-priming device, when material to position, control valve automatic control of material, at this time can observe and control the feeding speed from sight hole, when the degree of vacuum in condenser meet the process requirements, can be exported from material extraction material, as long as the balance of vacuum degree and front-rear, can continue to produce.

4. Use precautions

1. Clean the top of the lid with hot water or sodium hydroxide before each use.

2. Keep the sealing parts in good condition when used. No leakage should be allowed.

3. Check the diaphragm pressure gauge regularly to keep it accurate.